For aluminum plate processing factory, aluminum plate engraving machine is a sharp tool for our production. Improving its working speed to improve efficiency can enhance the competitiveness of enterprises, which is particularly important for the development of enterprises. How to provide working speed?
First, reset the relevant parameters of the machine.
CNC aluminum engraving machine in the running parameters, mainly in manual low speed, manual high speed. These two parameters affect the running speed of the machine in manual state. The idle speed affects the speed of the machine after lifting the tool. It is not difficult to understand that the processing speed is the normal running speed of the machine. These speeds should be determined according to the material and material to be carved.
Secondly, the tool is selected according to the path displayed by the software.
The software will generate different engraving paths according to different graphics and different tools. The different engraving paths mean different carving time. In other words, we choose the most suitable tool according to the material to be processed, so as to facilitate the aluminum engraving machine to generate a better path, reduce the processing time, and make the production work more efficient.
Third, the setting of lifting distance of aluminum engraving machine.
Practice has proved that the smaller the tool lifting distance of the aluminum plate engraving machine is, the shorter the idle running time of the equipment is. Therefore, we should judge this value according to the material to be processed, but we should try our best to set this value as the minimum value.
In addition, the processing of aluminum plate engraving machine is divided into two parts: rough machining and finish machining. In the first part, the overall speed of rough machining and tool selection should be faster and better, As far as possible to cut off all the allowance, in order to save time and improve work efficiency, of course, the performance of aluminum engraving machine is not only reflected in the hardware configuration of the machine, but also requires us to accumulate processing experience bit by bit to improve the processing efficiency.
Fourth, to improve the speed of the aluminum engraving machine, the main point is to determine a reasonable engraving speed according to the hardness of the engraving material and the performance of the engraving tool. Of course, the stability of the aluminum engraving machine itself should also be considered, so that the machine can not be overloaded. The cutting tool of each kind of material will have a cutting amount, so we'd better set the cutting amount to 2 / 3. In this way, the tool life will be greatly increased, and the processing speed can be greatly improved. In this way, the tool cost can be saved and the processing efficiency can be improved.