凉山州怎么找到 附近 服务

清远附近想过夜电话联系

400-900-8910

Current location: information  >  Technical Q & A > Correct operation steps of aluminum plate engraving machine < back to list

Correct operation steps of aluminum plate engraving machine

Published on: September 28, 2020 Guangtiandi CNC

1. Before starting the aluminum plate engraving machine, make sure that all connections between the machine tool and the computer are normal, and then turn on the power supply of the machine tool and the computer. After the start of the system, enter the CNC system.


Go back to the "control system" menu. The machine will automatically return to the mechanical origin and correct the system coordinate system. In some cases, for example, after the last normal shutdown, the user does not have to perform the mechanical reset operation after restarting and continuing the last operation. When exiting the system, the current coordinate will be saved. In addition, if the user confirms that the current position is correct, this operation can not be performed.


3. Before processing, the user generally needs to load the required processing program, otherwise, some functions related to automatic processing are invalid. Select "open (f)" | "open (o)"; the menu will pop up the windows standard file operation dialog box, from which you can select the drive, path and file name of the file to be opened. After clicking the "open" button, the processing program is loaded into the system.


4. Determine the origin of the workpiece, manually move the X and Y directions of the aluminum engraving machine to the desired origin position on the workpiece, select the menu "set the current point as the workpiece origin", or clear the coordinate value of the current position in the coordinate window, so that the current position can be used as the starting point for processing when the processing program is executed.