潍坊租人睡觉过夜APP哪个好

清远附近想过夜电话联系

400-900-8910

  •  Jack 2060 double dragon door four head aluminum plate carving and milling machine
  •  JK-TOP2 2060

Jack 2060 double dragon door four head aluminum plate carving and milling machine

Product model: jk-top2 2060

Working width: 2000 * 6000mm

Machining speed: 200m / mi

Processing speed: 6-16m / MIM

Repeat positioning accuracy: ± 0.025mm

Spindle power: 7.5kw



product details

technical parameter

Video introduction

Customer case

application

Random accessories

after-sale service

Maintenance manual



1. Heavy duty bed, not easy to deform, machine does not shake when high speed running, the processing surface of product is smooth and not easy to break knife

2. Fast processing speed, no damage to materials, high precision, no oil stain after processing, good smoothness

3. There are two gantry on one worktable, and the spindle on the two gantry can work at the same time, which is equivalent to two engraving machines sharing a worktable, one top two!


Speaking of this shuanglongmen engraving machine, you may not know the customers who are not in touch with the engraving machine. Under normal circumstances, engraving machine is a gantry. Double gate machining can be carried out at the same time if the required stroke size of the workpiece is not large. There are two worktables on the gantry at the same time. It is equivalent to two engraving machines sharing one working table, one top two sets! One machine can be used for multiple purposes, and different processes can be processed at the same time, which saves money, site and labor.


For example, the engraving machines of shuanglongmen are generally liked by old customers who have used engraving machines for several years. On the one hand, the production scale of these customers needs to be expanded, and the production efficiency needs to be improved. Therefore, new machines should be installed. On the other hand, the cost must be controlled and the quality must be guaranteed.


  

It is suitable for the surface processing of aluminum veneer, aluminum curtain wall, aluminum ceiling, copper plate, fluorocarbon spraying board, honeycomb plate, etc.

The two engraving machines share one working table, one top two sets! One machine can be used for multiple purposes, and different processes can be processed at the same time, which saves money, site and labor.


model JK-TOP2 2060 
Processing area
2000*6000mm
Idle processing speed 200m/mim
Processing speed 6-16m/mim
Repeat positioning accuracy ±0.025mm
Spindle power 7.5KW
Spindle speed 6000-24000RPM
working voltage 220V/380V ±5%  50HZ
Total weight 3900KG
Appearance size 6900*3000*2000mm



Serial number

Name of accessories

number

remarks

one

2060 machine

One


two

7.5kW automatic tool change spindle

Four


three

Fuling inverter

Four


four

DELTA servo motor

8 + 4 holding brakes


five

Left and right motor cover

2 for each


six

Head cover sheet metal

Four


seven

Factory name plate, model plate and sticker

Two each

Pasted on the gantry

eight

Dust hood

Four

Mounted on the spindle

nine

Spray equipment. Lubrication systems

Four each

Mounted on the spindle

ten

Oil pot

Two

Installed on the gantry

eleven

Control cabinet

Two


twelve

Automatic feeding wheel

Two


thirteen

hold-all

Two


fourteen

Pressure plate

32 sets

In the toolbox

fifteen

Industrial chiller cw-3000

Four


sixteen

Aluminum knife

Four tubes of 3mm, four of 4mm, eight of 6mm and eight of 8mm

In the toolbox

seventeen

Weihong 95A system with handwheel

2 sets

In the control cabinet

eighteen

Gallbladders

There are four ∮ 4, ∮ 1 / 8, ∮ 6, ∮ 8, ∮ 12

In the toolbox

nineteen

hilt

Eight

In the toolbox

twenty

Nut

Four

Installation on equipment

twenty-one

Wrench

Two sk16 and 13-17

In the toolbox

twenty-two

Foot pad (iron & glue), screw, nut

8 each


twenty-three

4 * 10 screws

10

In the toolbox

twenty-four

5 * 10 screws

10

In the toolbox

twenty-five

6 * 25 screw

8

In the toolbox


1. After the equipment commissioning and acceptance is signed and confirmed, the quality guarantee period of the whole machine is one year, including one year of spare parts warranty period and service, and national joint guarantee.


2. If necessary, the Demander shall send professional engineers to the site within 48 hours after receiving the technical service notice to solve the problem within 24 hours.


3. In case of quality problems of system parts during the warranty period, our company will send the best service engineer to provide telephone or on-site service at any time. During the warranty period, our company is responsible for replacing parts and services free of charge for any damage or damage caused by the quality of the equipment itself, except for the routine consumables and the accidents that are caused by the user's illegal operation.